How to install an aerothermal system
Date Published

In recent months we have seen energy costs reach unimaginable prices, which has led many users to rethink the type of heating and cooling system they want in their homes. When it comes to choosing efficient systems, one of the most interesting options is aerothermal energy, especially if you already have a solar panel installation. In this post we tell you about it and the main things to keep in mind when installing it.
Installing an aerothermal system.
Aerothermal systems are especially suited to single-family homes or small and medium-sized buildings, although they also have industrial applications. They can be installed both in new builds and in existing buildings that have space for the outdoor units. The two emission systems most used with aerothermal energy are underfloor heating and low-temperature radiators, although they are not the only ones. Depending on the case, the aerothermal installation will have to be done on an existing system or can be built from scratch.
Steps to install an aerothermal system.
Determine the most favourable type of installation and do the design.
The first task is to set out the different installation options and then choose the one that is best for the customer. Factors to take into account here include the customer's needs (for example, whether they want to include DHW or not), whether there is already an existing installation (radiators or underfloor heating) or it is a new build, the available budget, and so on. Based on this, you will need to design the installation with all the necessary calculations and select the components for the installation.
Select the components needed for the installation.
Among the main components to choose is the heat pump, which must suit the needs of the installation. The heat pump can be:
- Air-to-air: for heating and cooling, but not for producing domestic hot water (DHW).
- Air-to-water: one of the most widely used systems today, it also lets you add domestic hot water (DHW) production to space heating and cooling, so that the home's needs are covered with just one installation.

When choosing the aerothermal unit you will need to consider the location and size of the home. The placement of the outdoor unit (compressor) is critical, as it is a source of noise and can cause problems with neighbours if it is not positioned correctly. Some recommendations to follow in this respect are:
- There must be no obstacle blocking the free flow of air around the outdoor unit, both for intake and discharge.
- It should not be placed near resting areas or terraces, or facing walls with glass.
- Choose a location that is free from prevailing winds.
- There must be a nearby electrical installation suitable for connecting it.
As for the indoor unit (hydrokit), you will need to assess whether there is a suitable place for it or whether to opt instead for a monobloc unit, meaning one that does not need an indoor unit because it is built into the outdoor unit. As well as these components, others may also be needed, such as the DHW tank, radiators, valves, and so on, depending on the installation.
Removing the previous installation.
If the project replaces an old installation, you will need to remove the old boiler and other elements (such as radiators) if they are considered unsuitable for reuse. In this case you would have to drain the water circuit and fit the new radiators with the appropriate connections.
Fitting the new installation.
When it comes to fitting the new installation, you will need to take into account the specific needs of each project, as the number of working hours required will depend on them. The tasks involved in the installation may include:
- Installing the pipework
- Installing the outdoor unit
- Installing the indoor unit
- Installing the DHW tank
- Installing the radiators
- Installing wifi and communication connections
- Etc.
Commissioning.
Finally, once the installation is complete, you need to check all the elements and connections to make sure it works properly. Once finished, the customer can start using their new installation.
Aerothermal energy and solar energy.
Combining an aerothermal installation with solar panels is a smart decision, since both systems boost the energy saving and emissions reduction benefits they already offer on their own. This way, the aerothermal system's electricity needs are covered by the home's own solar energy production. If you are an installation professional and already include aerothermal installation in your services, or want to, at Wattwin we want to be your ally in implementing and commissioning your projects. With our platform, we highlight the importance of having advanced, precise design tools to make your work more efficient and effective. Our aerothermal designer will guide you through the whole process to create projects with a specific, optimised approach that guarantees maximum efficiency in each one.
How does it work?
Very easily. In just 3 steps you can create an aerothermal project ready to close your sale.
- Step 1: Build your product catalogue or use the one we offer. In just a few clicks you can keep it up to date.

- Step 2: Design your installation from the data you have entered. The design assistant will calculate the heating, cooling and DHW needs that each installation must cover. We have built a heat pump recommender that will advise you on which product in the catalogue is the most suitable.

WattConsejo:
This may be a good time to offer your customer other solar self-consumption and electrification solutions, such as solar panels or electric vehicle chargers. We call this "cross-selling". Wattwin is a comprehensive solution in which you can work on projects with different self-consumption products, whether residential or industrial.
- Step 3: Create a quote automatically. With Wattwin's proposal template, you will have a branded document ready to send to your customer. With this advantage, closing your sale will be much easier and faster.

We know your work doesn't end here. Once you've won that customer, it's time to get the installation under way. With Wattwin, you'll simplify your day-to-day work even more. Keep reading to find out how.
- Opportunities board: With this feature you can track the status of all your opportunities and keep better control of how many are in progress, which have been won and which need to be moved on again in case they have got stuck at some point in the cycle.
- Services module: With it, every installation start-up will be much easier to manage. Coordinate each installation step by step without losing information along the way, assign tasks to the different teams, follow the progress of each task and keep track of due dates.
Wattwin lets you track your projects, helping you spot possible incidents and/or keep equipment maintained. A happy customer is a guaranteed referral!
In short...
Wattwin is designed with you and your renewable energy installations in mind. Our software simplifies your work routine, giving you valuable resources and helping you deliver the highest-quality sustainable energy solutions to your customers. Together, we can drive the renewable energy revolution towards a cleaner future. And now what? Book a free session where our experts advise you and help you simplify your day-to-day work and scale your business.