Wattwin
General

How to expand a photovoltaic installation

Date Published

How to extend a photovoltaic installation

Rising electricity prices and the investment opportunities solar energy creates lead many customers to choose to expand their photovoltaic installation. When carrying out this expansion, you need to take certain aspects into account to make sure the new installation keeps working properly. In this article we tell you about them.

When to expand a solar installation.

The main reason to expand a solar installation is that a higher consumption needs to be covered. In a home this can happen if the number of people living there increases, or because a new appliance or an electric vehicle charger is added. In a business it can equally be due to growth in headcount or the arrival of new machinery. In many cases the expansion was planned from the time of the initial installation, whether for budget or technical reasons. In that case, the design should have taken this future expansion into account so that, when the time comes, only the essential components need to be replaced. One way or another, the usual approach is to increase the number of solar panels to cover that new consumption. Depending on this increase and the original design of the installation, you will also need to check whether other parts of the installation need to be replaced.

How to expand a photovoltaic solar installation.

The first step, as always, is to carry out a study to analyse which part of the installation needs to be expanded and whether the other elements are compatible with the new changes or not, in which case they will have to be replaced. Remember that using specialised software for designing solar installations can make this task much easier, saving time and avoiding the inclusion of incompatible components.

Step 1: increasing the number of solar panels.

As we have said, it is usually necessary to increase the number of solar panels, thereby increasing the installation's capacity to cover the new consumption. New panels can normally be combined with the old ones without problems, but you need to make sure the voltage they generate is uniform. A calculation must be done to estimate the number of new panels needed and to check whether there is enough space to fit them.

Step 2: calculating the new current and voltage.

The new voltage and current levels must be calculated to verify that they remain compatible with the rest of the installation's components. In this respect, pay special attention to the charge controller (if the installation has batteries) and check whether it is sized for the new capacity or needs to be replaced with a higher-capacity one.

extend installation

Step 3: Inverter.

The same approach applies to the inverter: make sure it has the capacity for the installation's new power, or consider replacing it with a higher-power one. If the model allows it, another option is to fit a second inverter in parallel to complement the one already installed. This should be checked especially where the increase in consumption comes from new devices, machines or appliances being added, since the inverter limits the number of items that can be connected at the same time.

Step 4: Batteries.

There are two options here: adding batteries to an installation that did not previously have them, or expanding the battery system the installation already had. These are two very different cases, so we will discuss them separately. To add a battery system to an installation that did not previously have one, you will first need to do the necessary calculations to estimate the backup capacity you want for the installation. This will determine how many batteries are needed. In this case the inverter must be compatible with the batteries and the grid connection (hybrid inverter). To expand an existing battery system, the recommendation is to not mix new batteries with used ones, as the wear on the latter can affect the performance of the former. The expansion then consists of replacing the batteries with a new set matched to the installation's new needs. The only exception to this recommendation is if lithium batteries are used, as this technology does allow modules to be added in parallel to increase storage capacity.

Design and expand photovoltaic installations easily.

As we mentioned in the article, the design of the installation and the choice of its components is essential for any job, whether a new build or an expansion. There are tools such as Wattwin that let you do these tasks simply and intuitively, that also let you generate quotes quickly and make it easier to choose and swap between compatible components.